// AI ACCESS HANDBOOK

AI tool access guide

Follow the setup guide from installation through connection testing. If you’re connected but still having trouble signing in, chatting, or using an API, use this guide’s contents to find the right section. It separates network paths, product eligibility, and usage limits instead of treating them as one issue.

// ACCESS CHECK

AI access troubleshooting: network, account and features

Start with the last step that worked

If a platform’s homepage loads in your browser, that only confirms that at least some of the resources used by that page came through. Sign-in may use a separate identity service, chats may send requests to a different API, and attachments may go through a dedicated upload service. A homepage that loads while sign-in fails is a different problem from a successful sign-in followed by messages that won’t send. Note the last step that worked: opening the sign-in page, returning to the product, selecting a model, or receiving an actual response? Start your next test at that point rather than repeating steps that already work.

First check the basics on your device: can you reach other sites as usual, is the system managing the date and time zone correctly, and does the current network require an access sign-in? If the product page fails only on one network, investigate DNS, the gateway, or the connection path. If the same account notice appears on another permitted network, save its exact wording and focus on the account. Don’t treat one successful refresh as a fix; repeat the original failing action to make sure it works.

Check network egress and service eligibility separately

The access address a platform sees is the address presented after the request passes through the network egress point. A browser, terminal, or desktop app on the same device may not use the same egress. A platform’s assessment of an address may also differ from public lookup results. An access address can inform a risk assessment, but it doesn’t replace account eligibility, workspace policies, billing details, or a product’s availability. If the platform explicitly says your location, account type, or feature isn’t supported, follow its guidance. Selecting a route doesn’t grant eligibility.

Risk checks at sign-in aren’t limited to the network address. A service may ask you to verify your identity again or stop the flow if it detects an unusual session. If a verification prompt appears after travel, check the platform’s account security page for alerts that need attention. If there’s no security notice and disconnections happen only while sending longer requests, focus your tests on the generation stage. Identify whether the message comes from the platform, browser, corporate gateway, or client app; a generic “connection failed” message doesn’t prove the platform restricted your account.

Keep a record you can compare

A useful troubleshooting record includes the time and time zone, tool and entry point, step reached, full error category, and whether the issue can be reproduced. If developer tools show a canceled request, determine whether you navigated away, the app canceled it, or the connection dropped mid-request; “canceled” alone doesn’t mean the server rejected it. For a fair comparison, keep the same account, feature, and input, and change only one condition. For example, record a failure in your current browser, then repeat the same action on another permitted network instead of changing the browser, route, and account all at once.

// PRODUCT SCOPE

Platform differences: web, API and workspaces

Check the specific product entry point, not just the brand

A brand’s website, mobile app, developer console, and organization edition may each have separate credentials, permissions, and availability rules. To check regional availability, find the official guidance for the exact entry point you’re using, and confirm whether it applies to personal or organization accounts. Use the platform’s current information, as availability can change. A screenshot showing another product working doesn’t prove your current entry point should work. Nor does signing into several pages with one account mean every feature is enabled.

Where to troubleshoot common AI tools
ToolCheck this entry point firstThen check
ChatGPTChat interface or developer APIAccount type, workspace, or project
ClaudeChat product or developer consoleAvailability and permissions for that entry point
GeminiApp, developer tools, or cloud projectAccount management and the feature you need
CopilotIdentify the specific Copilot productProduct license and organization policies
MidjourneyWebsite or officially supported entry pointAccount connection, task, and output status
CursorEditor sign-in or model requests from the editorSelected model, workspace, and request path

Check chat accounts and developer projects separately

For ChatGPT and Claude, for example, seeing conversations on the web doesn’t mean a developer project is enabled. If the website works but the API returns an error, check the credentials, project, and model in the developer console before deleting your web session. Conversely, a successful API response doesn’t mean the same person has access to a team workspace on the website. If your personal workspace works but the team workspace doesn’t, note which workspace is selected and ask an administrator to check membership and feature access. You don’t need to share full conversation contents to demonstrate the issue.

Gemini apps, developer tools, and cloud environments are separate entry points. Organization-managed accounts may still be subject to app licenses or project policies after sign-in. First identify the account and project in use, then check whether the requested feature is enabled. If you see “permission denied,” find out whether the error refers to the account, project, or resource. Access to a personal app doesn’t mean a company project permits API calls. Don’t substitute a personal account in a company environment; that can change where data is stored and who is billed.

Editors, cloud tasks, and outputs are separate stages

When troubleshooting Copilot, use the full product name. GitHub Copilot in an editor and Microsoft 365 Copilot for workplace use are different products; a license for one doesn’t confirm that the other’s extension is working. With Cursor, distinguish whether the editor can sign in, the selected model can be called, and the specific feature can send a request. If only a remote workspace fails, find out whether the request comes from the local interface, a remote plugin process, or the service itself. A local browser test says nothing about the remote path.

Asynchronous generation tools such as Midjourney can be broken down into submission, queueing or processing, and output display. If the page doesn’t refresh promptly, check whether the original task was accepted. If it exists and is still running, don’t submit the same task again right away. If it’s finished but the result isn’t visible, troubleshoot output loading rather than treating it as a failed submission. If the desktop app, website, or another official entry point behaves differently, note which account and entry point you used, then check service status and error guidance. Compare the actual results of the same feature across platforms, not just whether their homepages load.

// ROUTE REVIEW

Route checks: DNS, handshakes and exit IPs

First confirm which path the request actually takes

Before selecting a route, check the platform’s eligibility requirements separately from the network path. K3VPN covers 120+ countries and 170+ routes; see the server list for regions and route types. Coverage doesn’t indicate which third-party tools are available. As long as you’re following the product’s policies, use route selection to compare connection paths for your task, not to change account eligibility. If you’re unfamiliar with route types, start with choosing a route by region, type, and use case, then use the table below to pick an action to reproduce.

Route types help organize comparisons; they don’t rank performance
Route typeWhat it meansWhat to test
IEPL dedicated lineFocus on the transmission path across bordersRun the same generation task at the same time
RelayedRequests pass through an intermediary nodeCheck separately for connection and output interruptions
DirectThe client connects directly to the selected nodeCheck connectivity from your specific network to that node

Operating system proxy settings, browser network settings, client routing rules, and terminal process settings may not match. With split tunneling enabled, a rule that covers the product’s main page may not cover its identity page, API, or attachment service. If the client provides connection logs, compare the request time with the app and destination host, and check whether the expected rule handled it. On managed devices, use the configuration approved by your administrator. Don’t change system trust settings or access rules without authorization if a management policy blocks the connection.

Treat DNS resolution, connection, and certificates as separate stages

If a hostname can’t be resolved, the request hasn’t reached the application layer. First make sure you’re using a hostname from the official documentation, then check DNS in the process or runtime where the failure occurs. A browser and command-line tool may use different resolvers, and a hostname resolving on your device doesn’t mean it resolves inside a container. If DNS returns an address but the connection still fails, check whether the timeout occurs during proxy access, connection to the destination, or the handshake. A DNS response only confirms the name resolved; it doesn’t prove the platform is reachable.

Handle certificate errors separately. Check the device clock, hostname, and the trust store used by the app. For managed workplace devices that pass through an inspection gateway, ask an administrator to confirm the approved trust configuration. If the certificate hostname doesn’t match or the issuer looks unusual, stop there: don’t enter credentials or disable certificate verification just to get a response. If the browser works but the command-line tool reports a certificate error, comparing their trust sources is more useful than reinstalling the client or repeatedly switching routes.

Choose a test that reflects how you actually use the service

For a basic chat test, use a short prompt with no personal information. To check sustained output, use the same request that reliably generates several paragraphs. For attachments, choose a sample with no sensitive content. Keep the model, entry point, and account the same, then compare paths during the same usage period. Note whether the connection is established, output begins, and the task finishes. If short requests work but longer ones fail, investigate gateway and client timeouts. If only uploads fail, check the attachment stage separately. Don’t extrapolate the whole experience from how quickly one webpage loads, and don’t mistake a service queue for a route interruption.

// IDENTITY FLOW

Account sign-in: identity and redirects

Check the identity provider and account before you start

Start from the product’s official entry point and confirm your account type, permitted regions, and required identity details. Enterprise users should also confirm which organization identity to use, whether an administrator invitation is required, and whether the account has been added to the right workspace. If you normally use organizational single sign-on, keep using that method. Matching display names or similar account identifiers don’t mean an entry point will recognize them as the same identity. If your history is missing after switching sign-in methods, first check whether you’re in another account or workspace instead of assuming data was lost.

K3VPN doesn’t require an email address; you can create an account with a username and password. This applies to K3VPN only. Follow the account requirements of each third-party AI platform. Use separate credentials for different services, and follow your organization’s process for managing work accounts. To enable billing or update account details, check the official account settings for region, billing ownership, and payment rules. Correct any inconsistencies or contact support; don’t use false information to pass verification. Don’t share links containing temporary authorization details in group chats or support tickets.

Find out whether the failure happens before verification or on the return trip

After your browser leaves the product page for an identity provider, successful verification doesn’t necessarily mean the product has established a session. The identity service must return the browser to the expected address, and the product then checks the state from that same sign-in flow. Complete the redirect in the same browser profile and session; don’t copy an intermediate address into another window or device to continue. If the browser loops between pages, note the page names, domains, and any nonsensitive error message. Check whether site storage or redirects are being cleared or blocked.

For a confirmed browser issue, try a clean browser profile first; you don’t need to clear all site data. A private window can help identify extension interference, but it may apply different storage or cross-site restrictions, so success or failure there doesn’t prove which setting caused the issue. If the platform requires verification in the same browser, return to the original product entry point and restart the full flow. Administrators manage extensions and browser policies on managed devices; don’t disable all security controls just to test.

Distinguish account verification challenges from organization access errors

If the platform asks for additional identity verification, use its existing official recovery options. If the sign-in page confirms your identity but the product reports an error when you return, ask an administrator to check whether you accepted the invitation, your membership is active, and you’re in the correct organization. After team permissions change, follow the platform’s guidance to start a new session, then test the feature that didn’t work—not just whether your profile picture appears. Access to the same page from a personal account only confirms that a different set of permissions works; it doesn’t prove the team account or network path is at fault.

If you receive an unusual sign-in alert, review recent account activity and authorized apps, revoke sessions you don’t recognize, and follow the platform’s guidance to update affected credentials. If the platform says the account is disabled or under review, stop repeated sign-in attempts and don’t create another account instead of using recovery. Give support the time period, entry point, organization name, and a redacted error message. If further details are needed, send them only through the platform’s designated channel. If you can access account settings but still can’t perform the task, keep using the same account to check feature access and billing rather than switching between accounts and confusing the record.

// STREAM LIFECYCLE

Streaming output: first token, pauses and completion

A successful request doesn’t mean the response is complete

Streaming sends response chunks as a task runs. A request may receive a successful response but fail to finish because of a network interruption, service error, or client cancellation. Distinguish the time from sending the request to receiving the first chunk, pauses between chunks, and whether the task finished normally. A slow first chunk may mean queueing, model setup, or buffering along the path. If chunks arrive and then stop, check idle timeouts and midstream disconnections. If generation has finished but the interface keeps spinning, check whether the client recognized the completion event.

In a browser’s developer tools, keep the request list for the current session, find the request sent around the time you submitted the prompt, and check whether it received a response, was marked as canceled by the browser, or triggered a replacement request. If the tool can’t read the full event stream, that doesn’t mean the events never arrived; first check which transport types the browser supports. Don’t share an entire network log. Include only the failed stage, public error message, and request ID. If the product provides task history, use the original task’s final status to supplement what you observed in the interface.

Test timeouts and buffering separately

A connection timeout determines whether a connection can be established; it’s not the wait for the first response chunk or the overall request deadline. A read timeout often measures how long the client can go without receiving new data; check the client’s documentation for its exact behavior. A reverse proxy may also impose separate limits on upstream connections. If output stops after a similar idle interval each time, compare the limits configured in the client, application service, and gateway. Increasing only the client-side timeout won’t fix a gateway that closes the connection first. Don’t lengthen every timeout; that can hide the real bottleneck and tie up connections for longer.

Buffering means data reaches a layer but isn’t passed on until it has accumulated, so it arrives in a batch. If the content appears all at once after a wait and the task hasn’t been interrupted, compare the same officially supported streaming endpoint over an approved direct path and through the application. When receiving a stream with a command-line tool, you can disable its own output buffering to make events easier to observe; this won’t change buffering at an upstream gateway. Also check whether the app refreshes after each complete event or holds received chunks in memory and updates the interface only at the end.

Generation, uploads, and recovery are different operations

For tasks with attachments, first confirm the upload succeeded, then check parsing and generation. If plain text streams normally but a task with an attachment fails before generation, check the file type, size limits, and selected feature, and confirm the upload returned a token the app recognizes. Use a redacted test file instead of repeatedly uploading real files. For asynchronous tasks involving video or images, check the original task status rather than using chat response timing to decide whether it failed.

If a stream is interrupted, keep the content already received and mark the response as incomplete. The client shouldn’t silently resend the same generation request: the upstream service may have completed some or all of it, so retrying could produce duplicate results or additional charges. If the platform offers a way to check or resume a task, check the original task first. If recovery isn’t available, let the user or the calling application decide whether to retry. After troubleshooting, repeat the same input and verify the full flow: the response finishes, the interface stops waiting, and users can distinguish received content from the final result.

// API CONTRACT

API calls: credentials, projects and errors

Check the API contract with a minimal request

A web session isn’t an API credential. Before sending a request, check the official developer documentation for the endpoint, authentication method, model ID, request format, and billing project. Confirm that the client’s service, model, and project match the ones shown in the console. Configuration files, environment variables, and command-line arguments may override one another; check the tool documentation for precedence. Record the effective hostname, model, and project alias, but never reveal secret values or substitute browser session details for developer credentials.

For a minimal test, remove streaming, attachments, tool calls, and long conversation history. Keep only the fields required by the official example and use a short prompt with no sensitive content to check authentication, project, and model. Once that works, restore business parameters one at a time to identify which feature or input causes the difference. Even a minimal request may incur charges, so don’t run it as a frequent health check. To test only whether an HTTPS connection can be established, run the command below. It uses a public example site; for real troubleshooting, confirm the hostname in official documentation and don’t send credentials yet.

curl --silent --show-error --output /dev/null \
  --write-out 'HTTP %{http_code}\n' \
  https://example.com/

This command is for environments with a Unix-like command line. It doesn’t display the response body or follow redirects by default. An HTTP status only confirms that a response was returned; it doesn’t prove the project has permission or that streaming works. If you later make an authenticated request, pay close attention to where command traces, verbose network logs, and automation logs are written. Where possible, use the platform SDK and the runtime’s secret-management tools. Log only redacted error categories, request IDs, and call stages.

Classify errors by source and response body first

Choose the next check based on the response
What you seeCheck firstThen
No HTTP response receivedDNS, routing, certificates, or timeoutsCheck again in the environment making the request
Authentication or permission errorCredentials, project, role, and model accessCheck the relevant console using the error details
Invalid input or model parametersField format, model name, and feature supportStart with the official minimal request and restore fields one at a time
Rate limit or balance noticeWhat’s limited, usage, and project ownershipDistinguish a temporary rate limit from exhausted usage
Connection drops after a successful responseCompletion event, idle timeout, and bufferingCompare records by streaming stage

The same HTTP status can come from an organization gateway or the service itself. First identify who sent the response, then check the official documentation for that error category. If the response body is a proxy sign-in page instead of the expected format, it’s not surprising for the application to report a parsing error. If the platform’s error says the project lacks a feature, don’t keep testing by changing routes. Check roles, model availability, and billing in the console, or ask the project administrator whether the feature should be enabled.

Compare the same action in the web app

The web app usually includes an account session, workspace, and interface, while an API request depends on the parameters you send. If a command-line request works but the website fails, check identity redirects, frontend resources, and product access. If the website works but the API fails, check credentials and project settings. If both fail, confirm you tested on the same network and at the same time, and that you used the same model capability. At the end, note which parameter changed and which error went away. Save the verified minimal request separately from the production request so each can be reused as a test.

// RUN CONTEXT

Development environments: terminal, IDE and CI

Terminal: check the configuration inherited by the process

In a terminal, requests are handled by the current tool and its runtime libraries, which may not follow the desktop browser’s proxy settings. First identify whether the command runs on the host, in a subsystem, container, or remote machine. Then check whether the tool recognizes that environment’s proxy settings. Variable syntax, exception rules, and precedence vary by tool; don’t apply one runtime’s behavior to every command. Check only whether relevant settings exist and come from an approved source. Don’t print all environment variables to the console or logs.

When checking an environment, start with a read-only connection test. Don’t paste credentials into a debugging command; command history and process arguments may be recorded. If a container fails while the host works, check DNS, certificate trust, and effective settings inside the container. A loopback address inside a container points back to the container itself, not the same listener as that address on the host. If you need an organization proxy, use the connection method specified by the environment provider. Don’t expose a local listening port externally, turning a local troubleshooting step into a new access risk.

Editor: separate the interface from the extension process

Cursor and editors with Copilot may read environment settings from the desktop session at startup, while an integrated terminal reads settings from its own startup scripts. A successful request from the integrated terminal only shows that terminal process can connect; it doesn’t mean the extension host received the same settings. Check the editor or extension logs to see whether the error occurs during sign-in, request construction, or transmission. Then confirm whether the extension runs locally or remotely. In a remote workspace, check certificate stores, environment settings, account access, and network egress in the remote environment itself.

After changing an approved setting, reload the affected process as directed by the editor or extension, then repeat the same minimal action with nonsensitive input. If autocomplete works but chat doesn’t, don’t assume the entire plugin has a connection problem; note the feature, model, and workspace separately. In an enterprise environment, file context, code snippets, and attachments may be subject to organizational data policies. Use a sample project for diagnosis. Don’t send production repository contents to an unapproved service or attach extension logs containing prompts to a public issue.

Continuous integration: troubleshoot where the job runs

CI access comes from the job’s runtime environment, not the computer used to submit code. Hosted and self-hosted runners may have different outbound rules, trust stores, and credential-injection methods. First test connectivity to a public destination in an approved test job, then use a separate test project for a minimally authorized request. Check that protected environment variables are available to that branch and job. Builds from external contributions must follow the platform’s isolation rules; don’t expose production credentials to an untrusted build context while diagnosing an API issue.

Keep job logs to project aliases, request categories, statuses, and completion reasons. Don’t save full commands containing credentials, request headers, or raw artifacts. If a workflow can run multiple tasks in parallel, record concurrency and budget in its configuration so total usage stays under control. Test a single request and the planned parallel workload separately. If one request works but parallel requests fail, check rate limits and queues rather than repeatedly rerunning the whole workflow. Send permission errors to the project administrator and connection errors to the runner maintainer; that’s more effective than having everyone test from their own computer.

// LIMITS AND RECOVERY

Rate limits and recovery: backoff, usage and appeals

First identify whether it’s a rate limit, quota, or account review

Not all restrictions work the same way. Rate limits control requests or model usage over a period of time. Project quotas depend on usage and billing status. Account reviews follow a separate identity or compliance process. Note the affected feature, project, and full error message, then check usage and status in the relevant official console. A website prompt saying “try again later” doesn’t mean an organization was suspended, and a rejected API request doesn’t mean the website is broken. If a notice explicitly concerns account suspension or regional eligibility, stop automated attempts and follow the official recovery process instead of waiting and retrying as if it were a temporary rate limit.

Concurrency is an easy-to-miss factor. A service that looks like it has only one user may be handling website activity, background tasks, CI jobs, and retries at several client layers at once. First consolidate the application’s success, failure, cancellation, and retry records, then compare them with the project console’s usage data. Don’t assume one user action equals one request or infer API credits from a web subscription. If project usage seems high, check for duplicate runs, growing request context, or tasks split into multiple calls before reducing concurrency or shortening inputs.

Retries need limits, too

When the service permits retries, follow signals such as Retry-After. If no wait is specified, use capped exponential backoff with a small amount of random jitter so parallel tasks don’t retry together. Assign retry responsibility to one layer; retries in the SDK, application service, and job scheduler can multiply usage unexpectedly. Clients should be able to cancel a wait, and tasks should have an overall deadline. Insufficient balance, failed identity checks, unavailable models, and invalid parameters usually require changing the conditions; resending the same request won’t fix them.

After a disconnect, don’t assume an operation that could incur charges, modify records, or create a task didn’t run. First use the original request ID to check its status through the platform’s supported methods. If the API supports idempotency keys, reuse the same key for the same business action as directed by the official documentation; don’t assume every endpoint supports them. When status is available, let the queue decide whether to compensate based on the actual result. If status can’t be checked, record the uncertainty and ask a person to verify if needed. If some streamed content was displayed, make clear that it came from an interrupted attempt.

Handle review notices through official channels

After receiving a restriction notice, save the original time and official message, then check for use outside the product’s terms, conflicts with organization policy, unusual credential use, or outstanding billing issues. If a credential may have been exposed, revoke it, review request logs, and update the configuration for legitimate users. Notify the administrator if the account is managed. In an appeal, describe only what actually happened and provide the minimum information requested. Don’t submit secrets, sessions, raw account redirect URLs, or screenshots containing business data. Don’t try to bypass review or recovery by switching identities or network egress.

After access is restored, start with a low-volume, minimal task. Confirm the platform permits the feature and check the quota before gradually returning to normal concurrency. If the issue recurs, document its category, trigger, and owner in the operations guide, and give users clear instructions to wait or stop in the app. For K3VPN connection issues, see the Help Center. For initial setup, follow the first-time setup guide. Contact the relevant platform or organization administrator about third-party account, model, and quota issues.